Foam Stik
The POK FOAM with QUICK STIK TECHNOLOGY features the use of a small, easy to use solid stik of foam or wetting agents. No eductors or pails of foam needed. A foam/wetting agent stik inserted into the mixing tube dissolves the stik.
All ranges of pressure as low as 20 PSI. Machined out of high-grade aluminum alloy with the trademark NITUFFT finish that gives 50 microns of Teflon impregnated anodized unlike the 20 microns of standard anodized.
Simple to use and easy to train. Customize the system to your preference with several proportioners to choose from ¾'', 1.0'', 1.5'' and 2.5''.
The proportioners can also secure directly at the pump panel or inline between hoses.
|
 |
|
|
|
 |
POK Eductor and Ultra foam
These foam eductors operate according to the Venturi principle @ 200 PSI. As the pressurized water passes through the tip of the convergent pipe, a suction effect is created and the foam concentrated liquid is drawn up.
The eductor is fitted with a non-return valve with a polyethylene ball valve, which prevents the water from flowing back into the emulsifier tank. The metering orifice regulates the concentration flow and thus determines the percentage of the foam liquid.
Several models are available in different configurations and materials. POK is the only manufacturer that provides a range of portable eductors with extremely low pressure drop.
Simple to use and low maintenance. Durable, lightweight and machined out of high-grade aluminum alloy with the trademarked NITUFFT finish that gives 50 microns of PTFE impregnated anodized finish.
|
|
|
|
|
|
Foamjet
The MX-FOAMJET is a simple to attach, compact, lightweight, and rugged multi-expansion foam-aspirating attachment for your Twister, QuadraFog, METRO 1, ThunderFog, Mid-Matic and Mid-Force Series nozzles. It can be used with many foam concentrates that are recommended for low or medium expansion equipment. The thick foam blanket produced has superior vapor-suppression capabilities and is longer lasting than foam from non-aspirated nozzles.
The locking ring attaches easily and securely to the rubber bumper and can also be removed quickly for water-only or non-aspirated streams. Rotating the MX-FOAMJET gives you the unique ability to vary the expansion ratio and stream reach of finished foam.
|
|
 |
MX-FOAMJET - TWISTER 1" (25mm) (nozzle not included)
Air-aspirating foam-making attachment for all 1" (25mm) Twister Series nozzles. Flow range of 10, 24, & 40 gpm (37, 90 & 150 l/min) matches that of corresponding 1" (25mm) Twister Series nozzle needed for operation. The MX-FOAMJET is constructed of durable U.V. stabilized polyethylene and aluminum. Diameter 5.2".
|
 |
MX-FOAMJET - QUADRAFOG 1" (25mm) (nozzle not included)
Air-aspirating foam-making attachment for all 1" (25mm) QuadraFog Series nozzles. Aspirates foam when operating the 1" (25mm) QuadraFog nozzle in 24-40 gpm (90-150 l/min) setting. The MX-FOAMJET is constructed of durable U.V. stabilized polyethylene and aluminum. Diameter 6.4". NOTE: Not intended to produce foam at 5 and 10 gpm (20 and 40 l/min) settings.
|
 |
MX-FOAMJET - TWISTER 1.5" (38mm) (nozzle not included)
Air-aspirating foam-making attachment for all 1.5" (38mm) Twister Series nozzles. Flow range of 20, 60, & 95 GPM (75, 230, & 360 l/min) matches that of corresponding 1.5" (38mm) Twister Series nozzle needed for operation. The MX-FOAMJET is constructed of durable U.V. stabilized polyethylene and aluminum. Diameter 6.4".
|
 |
MX-FOAMJET - QUADRAFOG 1.5“ (38mm) (nozzle not included)
Air-aspirating foam-making attachment for all 1.5" (38mm) QuadraFog nozzles. Flow range of 30-125 gpm (110-500 l/min) matches that of corresponding 1.5" (38mm) QuadraFog nozzle needed for operation. The MX-FOAMJET is constructed of durable U.V. stabilized polyethylene, stainless steel, and aluminum. Diameter 7.4".
|
 |
MX-FOAMJET - THUNDERFOG (1.5 / 25mm and 2.5 / 65 mm) (nozzle not included)
Air-aspirating foam-making attachment for all 1.5" & 2.5" ThunderFog nozzles. Flow range of 30-250 gpm (110-500 l.min) matches that of corresponding 1.5" & 2.5" (38mm & 65mm) ThunderFog nozzle needed for operation. The MX-FOAMJET is constructed of durable U.V. stabilized polyethylene stainless steel, and aluminum. Diameter 8.6" (21.8cm). NOTE: Will not fit fixed teeth models manufactured prior to 5/97 without bumper upgrade. (Free upgrade with purchase of FJ-MX-FT).
|
 |
MX-FOAMJET - MIDRANGE
(mid-matic, mid-force, metro 1 1.5" (38mm) (nozzle not included)
Air-aspirating foam-making attachment for all Mid-Force, Mid-Matic and METRO 1 Series nozzles. Flow range of 70 - 200 gpm (260-760 l/min) matches that of corresponding Mid-Force, Mid-Matic and METRO 1 Series nozzles needed for operation. The MX-FOAMJET is constructed of durable U.V. stabilized polyethylene, stainless steel, and aluminum. Diameter 7.4".
|
